Mars CASHFLOW 126 - Manual (Page 22)

Product Configuration
-
Enabling coins or tokens
Example:- To enable channel 2 (the 5p coin in this instance) on your
validator follow these simple steps.
1. Switch Validator Power OFF.
2. Set 4 Way switches to Enable Teach.
3. Set Rotary Switch Dial to the appropriate channel.
(Channel No.2 for the 5p In this instance)
4. Switch Validator Power ON (LED will flash).
5. Set switches 2, 3 & 4 to ON.
(LED will stop flashing and stay on).
The Rotary Switch settings can be left unchanged.
6 The chosen coin is now enabled and the product is
ready for normal operation. For each additional
channel to be inhibited repeat process from 1 above.
18 ©, Mars, Inc., 1998
CashFlow ® 126 and CashFlow ® 129 selectors User Guide
Set switches 2, 3 and 4
as shown here.
Channel Enable
ON 1
2
3
4
2
3
4
ON 1
2
3
4
ON 1
END