Magellan Meridian - Manual (Page 22)

1 4 Magellan Meridian GPS Receiver
from a list of waypoints named WPT001, WPT002, etc. For that
reason, you may want to change the default name to one of your
choosing. You can also select a different icon that will help you find
the waypoint when you are using the map screen.
To do this, press and hold [GOTO] for 2 seconds just like you did
before. Use the UP/DOWN arrows and notice that the highlight
moves from field to field and then back to “Save.”
Highlight the Icon field using the UP/DOWN arrows and press
[ENTER].
The Icon Select window is displayed. Use the arrow
keypad to move from one icon to another with the
name of the icon displayed at the top. As a reference
tool, all of the icons and their names are listed in the
Reference Chapter of the User Manual. When you
have highlighted the icon you want to use, press
[ENTER].
The cursor is now highlighting the Waypoint Name field. With the
Name field highlighted, press [ENTER]. The input keyboard is
displayed. The very top of the keyboard window shows you what field
you are changing, in this case the Name field.
You can now use the arrow keypad to select the character you wish to
enter. With the character highlighted, press [ENTER] and the
character is appended to the name you are entering and displayed in
the field above the keys. (Note: waypoint names can be up to 8
characters in length.)
Arrow keys – Moves the highlight from one key to the next.
Shifts from upper
case to lower case or
from lower case to
upper case
characters.
Backspace – Moves the
cursor back one space,
erasing the last character
entered.
Clears the entire name.
Accepts the name and
returns to the Mark
screen.