Magellan Meridian - Manual (Page 28)

2 0 Magellan Meridian GPS Receiver
Reference
Turn the Meridian On — Applies power to the Meridian and displays last
NAV screen viewed. During power-up the first screen shows the
software and map database versions currently loaded in the Meridian.
The second screen gives a warning that must be read. After reading the
warning press [ENTER] to proceed. (If you do not press [ENTER], the
Meridian will shut off after 10 seconds.)
PWR ENTER
You have 10
seconds to press
ENTER accepting
the warning or the
Meridian will shut
off.
Turn the Meridian Off — Shuts down the Meridian.
PWR
During the 5 second countdown, pressing the [PWR] key again will
shut the Meridian off immediately.
Alternate Power On/Off — If you carry your Meridan in your pocket or
other places where the [PWR] button can be accidently pressed, you
may want to consider putting your Meridian in the Alternate On/Off
mode.
Turning the Meridian On (Alternate) – You must press and hold the
[PWR] button down until the first start-up screen is displayed. After
the screen is displayed, the Meridian operates normally.
Turning the Meridian Off (Alternate) – To turn the Meridian off, press
[PWR]. The countdown sequence will begin and you must press
[ENTER] before the sequence ends. If you do not press [ENTER]
before the sequence ends, the Meridian returns to the last screen
displayed.
Press ESC key to abor t
before 5 seconds has
elapsed.