Magellan Meridian - Manual (Page 30)

2 2 Magellan Meridian GPS Receiver
Reference
Selecting NAV Screens — The [NAV] button provides a means of
accessing the navigation screens. (Note: the sequence displayed is when
all eight navigation screens are turned on. Screens turned off in Setup
will not be displayed.)
Map Screen
Compass Screen
Large Data Screen
Position Screen 1 Position Screen 2
Road Screen
Data Screen
Speed Screen
Sat Status Screen
Navigation Screen Sequence
NAV
ESC
Returning to Last Viewed NAV Screen — Pressing the [NAV] button
returns the Meridian to the last NAV Screen viewed.
NAV
(Note: if the NAV screen is pressed from a screen where data is being
input, the data will not be saved.)
The Map screen is the very heart of the Meridian. The Map screen has two
modes: Position and Cursor.
In the Position Mode, the map is centered around your present position with an
arrow cursor indicating your position and points in the direction you are
heading. A customizable area is presented at the bottom of the display.
In the Cursor Mode, you are provided with a cursor that can be moved on the
map. At the bottom of the display is the information for the position of the
cursor relative to your present position. Also any points of interest that the
cursor is over will be shown.
To access the Cursor Mode, press any arrow on the keypad. A crosshair appears
that can be moved with the arrow keys.
To return to the Position Mode, press [ESC]. The cursor will disappear and the
present position icon will appear centered on the map.