Magellan Meridian User Manual
Page 97
Magellan Meridian GPS Receiver
8 9
Appendix
Available as accessories for your GPS receiver are the following cables: External
Power Cable with Cigarette Lighter Adapter, Power/Data Cable, Data Cable and
PC Cable with Cigarette Lighter Adapter. The instructions given below apply to
all cables, unless otherwise stated.
The cable can be connected to the receiver two different ways:
Connecting with the Meridian
mounted to the Mounting
Cradle. Place Meridian in the
cradle, bottom end first. Snap
the Meridian down until the
release latch locks it in place.
Attach the cable through the
opening in the back of the
mounting cradle. It is not
necessary to tighten the captive
screw to the receiver, although
you may do so for added security.
Connecting directly to the Meridian.
Using the captive screw that is attached to
the plug, tighten into the back of the
receiver.