Maxtor DVMR - Manual (Page 12)

11
3) Camera
4) Monitor
Connect cameras to the camera input on rear panel of DVR marked CAMERA IN.
Connect the video output marked MONITOR to Video-In of Main monitor.
CHAP. 3 Installation
Connect one DC 12V, 8.3 A Adaptor to the back side of Power Jack for right operation of 2HDDs
and CDRW.
5) Power
Before you turn on the Power switch, be sure all necessary devices such as Power
adaptor, cameras and Monitor are connected properly to DVR!
Notice
To avoid accidental deletion of HDD data, please make sure to press MENU button
before powering off the unit. This takes the unit out of record mode for safe shutdown.