Maxtor DVMR User Manual

Page 28

Advertising
background image

27

CHAP. 5 Set Up

5-4. RECORD SETUP

This is the most important configuration of the DVR.
Enter into SYSTEM MENU-RECORD SETUP
and press the [ENTER] button.

SELECT MENU :

▲▼, & [ENTER]

RECORD CONFIGURATION
SCHEDULE SETUP
HOLIDAY SETUP

RECORD SETUP

1) RECORD CONFIGURATION

Use direction button to move and [

-

] [+] button to set value.

(4) RESOLUTION : Set recording resolution.

- 120 ips at 720x240(NTSC) , 100 ips at 720x288(PAL)
- 240 ips at 360x240(NTSC) , 200 ips at 360x288(PAL)

※ It is not possible to see those images in full screen mode in playback.

Recording in Dual resolution is recommended for higher recoding speed, and also to send
more images via IP network.

(5) RECORD IN ALARM : Set record speed (skip rate) in ALARM record mode.

(6) RECORD IN MOTION : Set record speed (skip rate) in MOTION record mode.

(7) CONTINUOUS RECORD : Set record speed (skip rate) in CONTINUOUS record mode.

Set record speed (skip rate)

- 1/1x, 1/2x, ………. 1/999x record speed
- ex: 1/2x ) R->S->R->S…

- ex: 1/3x ) R->S->S->R->S->S->R…

- ex: 1/4x ) R->S->S->S->R->S->S… ( R : RECORD S : SKIP )
- ex : If record resolution is set at 360x240, 1/1x = 120 ips, 1/2x = 60 ips, 1/3x = 40 ips, etc.

※ Data size of image in PAL system is a little bigger than NTSC system, but the total recording time

is same as in NTSC system.

ON

TRIPLEX

ENHANCED

60IPS 720*240

1/1X

1/1X

1/1X

SELECT MENU :

▲▼, CHANGE VALUE : + -

OVERWRITE

MULTIPLEX

QUALITY

RESOLUTION

RECORD IN ALARM

RECORD IN MOTION

CONTINUOUS RECORD

RECORD CONFIGURATION

(1) OVERWRITE : Set overwrite or stop recording when

the HDD is full.

(2) MULTIPLEX

- DUPLEX : Playback & Ethernet
- TRIPLEX : Playback & Recording & Ethernet

※ Note: DUPLEX MODE is recommended to playback

the images at a maximum frame rate.

But, it makes DVR not to record during search.

(3) QUALITY : Set recording picture quality.

Actually it is fixing maximum data size of
image for each picture quality in 5 steps
as follows.

-

BASIC

- NORMAL
- ENHANCED
- FINE
- SUPER FINE:

Default quality set by manufacturer

In Emergency recording mode, recording quality is

SUPER FINE.

To send more images via IP network and longer recording

time, set QUALITY at NORMAL or ENHANCED and

record at 360x240(360x288).

Advertising