Maxtor DVMR - Manual (Page 23)

22
CHAP. 5 Set Up
5-3. CONFIGURATION
Various parameters for system can be set in CONFIGURATION menu.
Enter into SYSTEM MENU-CONFIGURATION and press the [ENTER] button.
1) HDD MANAGEMENT
This page includes information about start and end of recording, location of recorded data, or location
of last playback on HDD. In addition, users can delete all the data on HDD.
SELECT MENU :
▲▼, & [ENTER]
HDD MANAGEMENT
TIME/DATE SETUP
CAMERA SETUP
INTERVAL SETUP
ALARM SETUP
BUZZER SETUP
PASSWORD SETUP
SYSTEM INFORMATION
CONFIGURATION
HDD CLEAR [ENTER], EXIT [MENU]
STATUS HDD DATE/TIME
----------------------------------------------------------------------
BEGIN MASTER 2005/04/08
12:12:05
RECORD MASTER 2005/04/09
15:09:58
PLAY MASTER 2005/04/08
19:44:31
HDD STATUS NORMAL
HDD CLEAR IN USE
HDD SETUP
On the [HDD CLEAR] sub-menu, press the [ENTER]
button to delete all image data on HDD.
The system will ask password for verification.
After you clear all data on HDD, status of HDD CLEAR
changes from IN USE to EMPTY.
※ When you clear HDD, event list is deleted, too.
ENTER PASSWORD : ________
INPUT YOUR OWN PASSWORD.
TO EXIT, PRESS [MENU]
EMPTY
(2) HDD INFORMATION
This menu will show the physical information
of HDD in DVR.
: Maxtor 6Y080L0
: PIO-4
:
81,964,302,336 BYTES
: 2005/04/08 12:08:56
: 2005/04/08 12:08:56
: AT5520026DT
: 240/120nsec
: 80GB
: 2005/04/08 12:08:56
: 2005/04/08 12:08:56
TO EXIT, PRESS [MENU]
[MASTER]
MODEL
SPEED
SIZE
START
END
[SLAVE]
MODEL
SPEED
SIZE
START
END
HDD INFORMATION
(1) HDD SETUP
Enter into SYSTEM MENU-CONFIGURATION-HDD MANAGEMENT and press the [ENTER] button.
HDD SETUP
HDD INFORMATION
CAMERA TITLE
CAMERA SETTING
CAMERA ACTIVE SETUP
MOTION SETUP
OK
If you selected OVERWRITE in Record Setup, the HDD STATUS presented as OVERWRITE.