Maxtor DVMR - Manual (Page 30)

29
CHAP. 5 Set Up
5-5. BACK-UP
CD-R SETUP
HDD
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
CD-R
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
[ SIZE ] 000MB
BURN
SELECT : SETUP BUTTON, JOG SHUTTLE
User can back up the recorded data to CD using CD writer installed in DVR.
Refer to [START] and [END] of data on HDD and set copy from time, [START], and size of data
copied, [SIZE], and move to BURN and press [ENTER] button to start copy.
5-6. EXTERNAL DEVICE
Set parameters of external devices connected to DVR, like Ethernet, PTZ camera, RS-232C, etc.
Use direction button to move to sub-menu and Press [ENTER] button to set.
System Status Messages :
- CD-RW DOOR CLOSE. CHECKING CD-R : Blank CD check
- INPUT BLANK CD : CD writer has no blank CD.
- CD-RW DOOR OPEN : Open CD-RW and insert blank CD –R media into CD drive.
- CD-R MEDIA IS DETECTED : Blank CD-R media has been inserted and detected. DVR system will
display size of blank CD-R.
After you set [START] time and [SIZE] in CD-R sub-menu and then select BURN, DVR system starts
copying images to CD and shows following message.
CD-RW BURINING START
CD-RW BURNING : LEAD-IN
CD-RW BURNING : IMAGE DATA
CD-RW BURING : CLOSE TRACK
CD-RW DOOR OPEN
When burning is completed, CD-R media will be ejected automatically.
To copy more images, repeat above process. In the next back-up process, [START] time in
CD-R sub-menu shall be [END] time in previous back-up, and you can copy images in series
to many CDs as many as you want.
CD-R SETUP
HDD
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
CD-R 700 MB
[START] 2005/AUG/07 AM04:04:12
[ END ] 2005/AUG/08 PM08:12:23
[ SIZE ] 700 MB - > 700MB
BURN
CD-RW BURNING : IMAGE DATA.
SELECT : SETUP BUTTON, JOG SHUTTLE
_ _ _ _ _ _ _ _ _ _ _
00-0A-A2-00-00-00
_ _ _ _ _ _ _ _ _ _ _
192.168.001.160
_ _ _ _ _ _ _ _ _ _ _
50000
_ _ _ _ _ _ _ _ _ _ _
192.168.001.001
_ _ _ _ _ _ _ _ _ _ _
255.255.255.000
AUTOMATIC
SELECT MENU :
▲▼, & [ENTER]
MAC ADDRESS
IP ADDRESS
IP PORT
GATEWAY
SUBNET MASK
DHCP SETUP
IP CONFIG SETUP 1) TCP/IP SETUP
TCP/IP function enables user to see live pictures and
recorded pictures via the internet.
(1) IP CONFIG SETUP :
Show the network information assigned to the DVR
unit. If the DHCP setup status is AUTOMATIC, user
can set the IP port only and if the DHCP setup status
is MANUAL, user must set all parameters.
For detail procedure of Remote viewer program
installation, refer to CHAP. 6 Software
program.(Remote viewer software).