Micon IP-220E - Manual (Page 16)

15
Chapter 4: iGuardware
Fig.11 iGuard Web Manager
4.2.1.3 IP Configuration
This section allows you to set the IP configuration for iGuard.
Select the iGuard on the right display screen, and then click “IP Configuration”. This
will bring up the IP Address Configuration window. There are two tabs;
• IP
Address
• Advanced (for port setting configuration)
When using iGuard for the first time, it is advised to choose the “Using Static IP
Address” option. For this option, the user will have to enter an IP Address, Subnet
Mask and Gateway of their choice (refer to Appendix C for IP address explanation).