Micon IP-220E - Manual (Page 17)

16
Chapter 4: iGuardware
Fig.12 IP Configuration: Set an IP Address for iGuard
Once the IP Address is set, you will be able to connect to iGuard webpage by entering
this IP Address into a standard browser.
“Obtain an IP address by DHCP or BOOTP”
The IP address, Subnet Mask and Gateway is acquired directly and assigned
automatically by the system.
This “Advanced” section sets security password against unauthorised access to
iGuard. Note, this password may be different than the administrator password.
Fig.13 IP Configuration: iGuard Advanced settings