Matrox Electronic Systems G450 MMS - Manual (Page 22)

22 Matrox G450 MMS – User Guide
1 Solution If you’re having problems with a program that can be moved on your Windows desktop, run
this program on your primary display. Make sure the program window doesn’t overlap any
other display. If the program doesn’t work with the graphics card controlling your primary
display, or you want your main graphics card to control your primary display, see the other
solutions.
2 Solution Change the configuration of your computer BIOS so that the slot type of your main graphics
card has priority for becoming the primary display. For information on how to change your
computer BIOS settings, see your system manual.
If your computer BIOS doesn’t let you select which slot type has priority for becoming the
primary display, a BIOS update may be available to let you do this. (The BIOS of most
computers can be updated with software.) For a possible BIOS update for your computer,
contact your system vendor.
3 Solution If there’s a graphics controller built into the motherboard of your computer, by changing
your computer BIOS settings, you may be able to change which device controls your primary
display. For more information, see your system manual.
4 Solution If you don’t need to use the graphics card that’s controlling your primary display, remove it
from your computer. If your primary display is controlled by the motherboard of your
computer, see your system manual for information on how to disable this graphics controller.
2 Cause The program you’re using may not work properly with systems using more than one display
at a time.
1 Solution An update may be available for the program you’re using. This update may fix problems this
program has with multi-display systems. For more information, contact the software
distributor for the program you’re using.
2 Solution Windows 2000/XP – For advanced users – To use a program that doesn’t support multi-
display systems, you can disable all displays other than your primary display:
1 Restart your computer in “VGA” mode ( see “Restarting in VGA mode”, page 11 ).
2 Click Start " Settings * " Control Panel " Performance and Maintenance * " System
(double-click*) " Hardware " Device Manager . (* Depending on your version and
configuration of Windows, this part of the step may not be necessary.)
3 Click the plus sign to the left of the Display adapters .
4 For each display adapter, except for the one controlling your primary display, right-click
the name of a display adapter, then click
Disable " Yes .
Note: Your primary display can’t be disabled.