Matrox Electronic Systems G450 MMS - Manual (Page 8)

8 Matrox G450 MMS – User Guide
Display setup
Windows 2000/XP or NT 4.0 – Your Matrox display driver includes Matrox PowerDesk software. This
software helps you get the most out of your Matrox graphics card. This section has important
information on how to configure your display settings using Matrox PowerDesk software.
Accessing PowerDesk property sheets
Many display controls are on Matrox PowerDesk property sheets. You can identify
Matrox PowerDesk property sheets by the icon appearing on the tab. To access
these property sheets:
! Windows 2000/XP – Right-click your Windows desktop background, then click
Properties " Settings " Advanced . If you’re using a multi-display desktop, select a
display before clicking Advanced .
! Windows NT 4.0 – Click Start " Settings " Control Panel " Matrox Display Properties
(double-click).
Also, to quickly access PowerDesk features, click the Matrox QuickDesk icon ( ) on your Windows
taskbar. To see the QuickDesk icon in Windows XP, you may need to click the Show hidden icons
button ( ) on your Windows taskbar.
Monitor setup
Before changing your display resolution, color palette, or other Matrox PowerDesk settings, make
sure correct software monitor settings are selected. If you have a Plug-and-Play (DDC) monitor,
correct settings are usually automatically selected. The following explains how to make sure your
monitor settings are okay.
Note: Multi-display mode is supported under Windows 2000/XP and NT 4.0. For more
information on multi-display mode, see Windows 2000/XP online help under “Multiple
Display support”.
WARNING: If incorrect software monitor settings are applied, some monitors can be
permanently damaged. For more information, see your monitor manual.