Matrox Electronic Systems G450 MMS User Manual
Page 5
Matrox G450 MMS – User Guide
5
5
Connect your dual-monitor
cables
Attach your Matrox dual-monitor cables
*
to
the connectors on the bracket of your
Matrox MMS card. Make sure the
connectors are firmly in place.
6
Connect your monitors
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter included with
your product to connect your monitor cable
to your dual-monitor cable. The DVI-to-
HD15 adapter may already be connected to
your dual-monitor cable.
If your monitor has a DVI connector,
connect your monitor cable directly to the
dual-monitor cable without using a DVI-to-
HD15 adapter. You may have to remove the
DVI-to-HD15 adapter to connect your
monitor.
Make sure all connectors are firmly in place
and properly fastened.
* Only one dual-monitor cable is included with Matrox MMS×2 cards.
WARNING:
To
avoid damaging the
LFH-60 connector
on your dual-
monitor cable or on
your graphics card,
carefully insert the connector on your
dual-monitor cable as straight as possible
into the connector on your graphics card.
Specifically, inserting the connectors into
each other at an angle is likely to bend and
damage the pins on the connector of the
dual-monitor cable.
Dual-monitor
cable
HD-15
connector
DVI-to-HD15
adapter
DVI connector