Minolta Dimage 7i - Manual (Page 139)

139
When the camera is properly connected to the computer, a drive icon will appear. When using
Windows XP, the removable-disk window will open. If the computer does not recognize the camera,
disconnect the camera and restart the computer. Repeat the connection procedure above.
After using the four-way key of the controller to highlight the
USB option in the USB section of the data-transfer menu,
press the the right key of the controller.
• “Enter” should appear on the right side of the screen.
Press the center of the controller to send a signal to the com-
puter to initiate the USB connection.
• A screen will appear to indicate the beginning of the connection
process.
• When the signal has been received by the computer, the
camera’s monitors will turn off.
6
7
Trans
USB
USB Enter
Initializing USB
connection