Minolta Dimage 7i - Manual (Page 67)

Adjustments can be made repeatedly and in combination.
Adjustments remain in effect until manually reset. When set
to any value other than zero, an icon will be displayed on
the monitors as a warning.
To adjust flash compensation, the up/down keys of the con-
troller are used instead of the control dial. See
page 68.
67
2
DIGITAL EFFECTS CONTROL
1
Press and hold the digital-effects button (1) in the center of the switch and adjust the setting by turn-
ing the control dial (2) next to the shutter-release button. Release the digital-effects button to set the
adjustment.
Operating the controller is very simple:
The Digital Effects Controller is a powerful tool. As well as being able to make adjustments to expo-
sure, the controller can also change image contrast, color, and saturation. The effect of any change is
instantly visible on the monitors before the image is captured. Since compensation is applied to the
image before it is compressed and saved, image information can be optimised before leaving the
scene. The digital effects controller can be used with movie recording.
Turn the digital-effect switch to the image characteristic to be adjusted.
Exposure Contrast
Color-saturation Filter