Minolta Dimage 7i - Manual (Page 34)

34
DISPLAY CONTROLS – RECORDING MODE
Auto display – the camera will automatically change between displaying the
live image in the EVF or on the LCD monitor. The EVF’s eye sensors monitor
if the EVF is being used and switches the display location accordingly.
EVF display – the live image will only be displayed in the electronic
viewfinder. Under bright light, the image is easier to see in the EVF than on
the LCD monitor.
LCD monitor display – the live image will only be displayed on the LCD
monitor.
Located on the back of the camera, the display-mode switch and the display-information button con-
trol on which monitor the image is displayed and what information is included in the display. The three
position switch allows the choice between automatic display and setting the display to the EVF or
LCD monitor.
If battery power is a concern, have the eye sensor activate the EVF when in use, but not the LCD
monitor. The auto-display function can be changed in the custom 2 section of the setup menu (p.
124).
BASIC OPERATION