Minolta Dimage 7i - Manual (Page 82)

82
IMAGE SIZE
Changing image size affects the number of pixels in each image. The greater the image size, the
larger the file size. Choose image size based on the final use of the image – smaller images will be
more suitable for web sites whereas larger sizes will produce higher quality prints.
Image size must be set before the picture is taken. Changes made to image size are displayed on
the data panel, EVF, and LCD monitor. Image size must be reset manually. See navigating the
recording-mode menu on page 78.
Data panel
EVF and LCD
monitor
2560
1600
1280
640
Number of pixels
(hor. X vert.)
2560 X 1920
1600 X 1200
1280 X 960
640 X 480
Image size
FULL
UXGA
SXGA
VGA
The frame counter indicates the approximate number of images that can be stored on the
CompactFlash card at the camera’s image quality and size settings. If the settings are changed, the
frame counter adjusts accordingly. Because the calculation is based on average file sizes, the actual
image may not change the counter or may decrease it by more than one.
ABOUT THE FRAME COUNTER
RECORDING MODE