MACKIE TT24 - Manual (Page 12)

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
12
LP48 Card Routing
If you choose the LP48 card as the
source, then the available Instances
to choose from will depend on the
confi guration of the LP48 card.
The LP48 card has three different
modes of operation:
10 Insert EQs
4 x 8 Loudspeaker Processor
5 Insert EQs and 2 x 4 Loudspeaker
Processor (This is a split mode of the
above two modes.)
Insert EQs
In Insert EQ mode, the signals assigned
to the LP48 card go into the card, are
EQ’d and return to the insert point only.
They are not available for any other
routing. The output from the LP48 card
shows greyed-out labels for the inserts.
Loudspeaker Processors
In Loudspeaker Processor mode, there will either be 4 outputs (in
LP48 split mode) or 8 outputs (in 4 x 8 mode).
The available outputs from the Loudspeaker Processor are the
outputs from each crossover, such as a low, high for a two-way
crossover, low, mid, and high for a three-way, and a low, low-mid,
high-mid, and high for a four way crossover.
These can be routed to any input channel, or to any physical
output,
LP48 in
Split mode
LP48
in 4 x 8
mode