MACKIE TT24 - Manual (Page 15)

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
15
The vertical list along the left shows hardware outputs. These names appear in a single
column with the following contents:
Destination Hardware Outputs Notes
Aux 1-12
Group/Matrix 1-8
Main L, R, C
Monitor L, R, C
Tape A L, R
AES/SPDIF L, R
ADAT 1-24
Card A – Card Name 1-32 The card name is replaced with the name of the card in
the slot if one is present
Card B – Card Name 1-32 The card name is replaced with the name of the card in
the slot if one is present
Choose sources for each output by selecting an item from each of four drop down lists:
Signal Sources
Drop Down 1 Drop Down 2 Drop Down 3 Drop Down 4
Channel Output Main L, R, C (or M) Pre DSP, Post Fader
Aux 1-12 Pre DSP, Post Fader
Group 1-8 Post Fader
Matrix A-H Pre Delay, Post Delay
Monitor L-R
Ch Bank 1 1-24 Pre DSP, Pre Fader
Ch Bank 2 25-48 Pre DSP, Pre Fader
Ch Line 1-8 Pre DSP, Pre Fader
Ch FX 1 L-4 R Pre Fader
Ch Card 1-8 Pre DSP, Pre Fader
Hardware Input Mic/Line 1-24 -
ADAT 1-24 (44.1 or 48k) 1-12 if sample rate is 88.2 or 96k
Line 1-8 -
AES/SPDIF L-R AES or SPDIF, whichever is installed
Tape A L-R, B L-R -
Talkback In
Card Slot A - Card
Type (e.g.
U100) 1-32 (note LP48
shows additional
detail, see below) -
B - Card
Type (e.g.
U100) 1-32 (note LP48
shows additional
detail, see below) -