MACKIE TT24 - Manual (Page 9)

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
9
The vertical list along the left shows input channels which will be listed by their default name
and custom name (if assigned). Double clicking a channel will allow you to edit the channel
custom name. These names are in a single column with the following contents:
Destination Input Channels Notes
Analog 1-24 Full DSP when assigned to Analog Bank
Digital 25-48 Full DSP when assigned to Digital Bank or when
UFXII installed
Line In 1-8 EQ Only
Card 1-8 Full DSP
Input Routing Table
Signal Sources
Drop Down 1 Drop Down 2 Drop Down 3
Hardware Input Mic/Line 1-24
ADAT 1-24 (44.1 or 48k)
1-12 (88.2 or 96k)
Line 1-8
AES/SPDIF (one will be
shown depending on the
selection in setup>digital) L-R
Tape A L-R, B L-R
Talkback In
Card Slot A - Card Type (e.g. U100) 1-32 (note LP48 shows
additional detail, see below)
B - Card Type (e.g. U100) 1-32 (note LP48 shows
additional detail, see below)
Each Source Row is color coded according to the selection made in the Drop Down 1 source
type:
• Hardware Input – Pale Blue (a very-faintly blue-tint of white)
• Card Slot - Pale Yellow