Macsense Connectivity HomePod - Manual (Page 25)

19
7.0 HomePod Basic Operation
7.1 Turning HomePod On and Off
To turn on the HomePod, press and release the Power button. You
should be prompted with a startup screen that displays “HomePod
Wireless Audio Services”.
To turn off the HomePod, press and hold the Power button for two
seconds.
7.2 Resetting HomePod
In the rare event that HomePod is hung and does not respond to button
presses, you can reset the unit by poking on the reset button on the left
back side of HomePod using a paper clip, or you can temporarily unplug
the power cord to cycle the power.
7.3 HomePod Display Menus
HomePod menu system is a tree structure. You start at the Main Menu,
and every item on the menu either enters another sub-menu, or it
terminates in a screen in that branch.
The following is a tree structure of the HomePod menu system.
[Audio Server Name]
+ All Songs
+ Artists
+ Albums
+ Artist/Albums
+ Genres
+ Playlists
+ FM Radio
+ Settings
+ Network Settings
+ Network Information
+ IP Address Configuration
+ Dynamic IP Address
+ Set Static IP Address
+ Signal Strength
+ Speakers
+ Contrast
The Main Menu will automatically detect and list any Audio Servers
found on the network, listing one line for each audio library. If no
libraries are detected, then the first line will display “Searching for Audio
Servers”. Click the
button to refresh the list of Audio Servers.
Main Menu