Mace DVR0404RW User Manual
Page 31
!
31
CH 1
6.4 Menu Operation Detail
*The following Menu settings must be saved before the changes take effect.*
The menu for record search is pictured at the right.
First set the channel#, then date and time you want to
search, then select START, the playback begins.
First set the channel #, date and time you want to search,
then select SEARCH, the screen shows the 8 recording files
following the searching time. Use
to select the file to be
played. Press
ENTER to begin the playback.
Note the letters before the record are equal to following
R—Record M—Motion Detection A—Alarm
First set the search date, then select START, all the alarm records will
be displayed. Press
to select the record. Press
ENTER to play
the alarm record. Note: motion detection alarm can not be searched in
this category, but can be
searched in RECORD and LIST.
List
Alarm
CH 1
DATE 2002-12-08
6.4.1 Record search