Mace DVR0404RW - Manual (Page 47)

!
47
Timing 6-16 Allows the User to select the different channels and dates to perform the manual recording and 2
different periods of time. The set time in Time 1 and Time 2 are independent with the set time in Motion
detection. There is no week setting for Motion detection.
Timing of motion detection: User can set two time periods of the motion detection, time and the state of the
motion detection so as to activate the recording during the time period. Only when Motion Detection is On,
the set time period takes effect. If the state of the two time periods are both Off, the system will not record
in motion detection.
6-16