Mace DVR0404RW - Manual (Page 36)

!
36
Menu of Admin setting is pictured at Right:
Select GUEST and MANAGE. Press
or the number
key to change the password, then confirm the change by
inputting the password again. Press
ESC to go back to the sub
menu. Only ADMIN level user can change the password.
File delete
Used to clear the data in the HDD. Be careful with this item.
Before you delete the data, you have to input the manage password.
During Alarm tip on, when there is alarm input from outside,
the alarm information window will pop up. If Shutdown pwd is on,
you need to input the right manage level password before turning
off the DVR; if it is off, 4 seconds after pressing on the power
button the DVR will turn off. Output x o point and Output y
point are set for the starting point of the window on the screen,
and Playback height is to set the window height during
playback. The user can set the starting point of the monitor
screen and the size of the monitor screen and the playback
screen.
Press to get the setting and press ENTER to confirm. After the
default setting is selected, system will restore the original Factory
Default settings.
LOAD DEFAULT CONFIGURES?
YES NO
Default
Password
Others
ALARM TIP ON
SHUTDOWN PWD OFF
OUTPUT X/Y POINT 000/000
PLAYBACK HEIGHT 480
AUDIO MODE PCM 8KHZ
TITLE COLOR WHITE
MONITOR OSD ON
MAINTENACE WEEK S M T W T F S
MAINTENACE TIME 12:00 AM
SAVE CANCEL
SAVE CANCEL
6.4.4 Admin setting
DATA DEL
PASSWORD: _______