March Products 120 III (PC620) - Manual (Page 51)

User Manual version 2503
LIBRA 120 III (PC620 Intel 815E) 3-41
8. Insert the power cord (H) from the opening at the left
bottom side of the cabinet. Connect the power cord to the
power module and integrate the power module (I) to the left
bottom side of the cabinet with three TMS M3*6 screws.
9. Fix the HDD module (J) to the right bottom side of the
cabinet with three TMS M3*6 screws. Connect the big
4-pin power cable from the power module to the HDD.
10. Make sure all the cables from the printer power module (K)
to the printer module (L) are already properly connected.
11. Integrate the printer power module (K) to the left upper
side of the cabinet with three M3 nuts. Retain the printer
module (L) to the bottom of the cabinet with four TMS
M3*4 screws.
12. Plug the 4-pin male end of the Y-shape extension cable
from the printer power board to the big 4-pin female end
of the power supply.
13. Attach the plastic printer bezel (M) to the Kiosk cabinet
front side and clip it into place.
PDF created with pdfFactory trial version www.pdffactory.com