March Products 120 III (PC620) User Manual
Page 95
User Manual version 2503
LIBRA 120 III (PC620 Intel 815E)
5-85
u QUICK POWER ON SELF TEST
This category speeds up Power on Self Test (POST) after you
power up the computer. If it is set to Enable, BIOS will
shorten or skip some check items during POST.
Enabled: Enable quick POST
Disabled: Normal POST
u FIRST/SECOND/THIRD/OTHER BOOT DEVICE
The BIOS attempts to load the operating system from the
devices in the sequence selected in these items.
The Choice: Floppy, LS/ZIP, HDD, SCSI, CDROM & Disabled.
The choice: Enabled & Disabled.
u SWAP FLOPPY DRIVE
If the system has two floppy drives, you can swap the logical
drive name assignments.
The choice: Enabled & Disabled.
u BOOT UP FLOPPY SEEK
This category seeks disk drives during boot up. Disabling
speeds boot up.
The choice: Enabled & Disabled.
u BOOT UP NUMLOCK STATUS
This category selects power on state for NumLock.
The choice: Enabled & Disabled.
u GATE A20 OPTION
Select this category if chipset or keyboard controller should
control GateA20.
Normal A pin in the keyboard controller controls GateA20
Fast Lets chipset control GateA20
u TYPEMATIC RATE SETTING
Keystrokes repeat at a rate determined by the keyboard
controller.
When enabled, the typematic rate and typematic delay can
be selected.
The choice: Enabled & Disabled.
PDF created with pdfFactory trial version