5. installing work clamp, 6. installing welding gun/cable holder – Miller Electric MILLERMATIC 350P User Manual
Page 17
Advertising
.
A complete Parts List is available at www.MillerWelds.com
OM-1327 Page 13
3-5. Installing Work Clamp
1
Work Cable
2
Boot
Route cable through front panel
opening. Slide boot onto work
cable.
3
Negative (−) Output Terminal
Connect cable to terminal and
cover connection with boot.
Close door.
803 540-C
Tools Needed:
3/4 in.
3
2
1
3-6. Installing Welding Gun/Cable Holder
1
Welding Gun/Cable Holder
2
Wrapper
3
Screw Locations
Remove screws from side panel.
Place holder against side panel and
align screw holes. Secure holder to
side panel with the previously
removed screws.
Ref. 803 545-D / Ref. 803 539-C
1
2
3
Advertising