Miller Electric MILLERMATIC 350P - Manual (Page 18)

.
A complete Parts List is available at www.MillerWelds.com
OM-1327 Page 14
3-7. Installing Welding Gun
1 Drive Assembly
2 Gun Securing Knob
3 Gun End
Loosen securing knob. Insert gun
end through opening until it bottoms
against drive assembly (make sure
gun end does not touch drive rolls).
Tighten knob.
4
Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
Close door.
Ref. 803 541-C
1
4
3
2