Miller Electric MILLERMATIC 350P - Manual (Page 42)

.
A complete Parts List is available at www.MillerWelds.com
OM-1327 Page 38
5-8. System Reset
A system reset function is available that
completely resets unit back to all the
original factory settings.
To access this menu, turn on welding power
source, then press the SETUP (1) button
when the SETUP light illuminates under the
Left display.
SRST will appear on the left display and OFF
will appear on the right display.
To prepare the unit for system reset, rotate
right knob until ON appears on the right
display.
To apply the system reset function, press
SETUP (1) button, and wait until unit
completely reboots before performing any
other operations.
Ref. 213 935-A
1
.
Accessing the System Reset function will also allow access to Timer Reset ( RTMR )
and Option Reset ( ORST ) functions. The timer reset and option reset functions are
for use by factory authorized service personnel only.
Do not use the timer reset or option reset functions if they appear on the displays.