Minicom Advanced Systems DX User IP - Manual (Page 37)

USER GUIDE
36
Secondary Time Server
This address will be used in case the Primary Time Server can't be contacted.
Remote Console & HTTPS port
Port number at which DX User IP's Remote Console server and HTTPS server are
listening. If empty the default value is used.
HTTP port
Port number at which DX User IP's HTTP server is listening. If empty the default
value is used.
Telnet port
Port number at which DX User IP's Telnet server is listening. If empty the default
value is used.
Bandwidth limitation
The maximum network traffic generated through the DX User IP Ethernet device.
Disable Setup Protocol
Exclude the DX User IP from the setup protocol.
34. Dynamic DNS
Use the free Dynamic DNS service at www.dyndns.org . See Figure 28.
DX
USER IP
Internet
Dynamic DNS server
www.dyndns.org
Administrator PC
DSL
Dynamic IP
NAT
DSL router
LAN
Server
Figure 28 Dynamic DNS scenario