Minicom Advanced Systems DX User IP - Manual (Page 60)

DX USER IP
59
Intelligent Sync - If fast sync doesn't work or the mouse settings have been changed
on the host system use the Intelligent Sync option.
To do so:
1. Ensure the picture is correctly adjusted, Click Auto Adjust or manually correct
the picture using the Video Settings.
2. Choose Options / Mouse Handling / Intelligent Sync.
Pressing the button leads to a fast sync, except when the video mode
recently changed.
Note! For the intelligent sync to work, the picture MUST be correctly adjusted. Use
the auto adjustment function or the manual correction in the Video Settings panel to
adjust the picture. The video must also be of sufficiently good quality.
Single mouse mode
The information above applies to the Double Mouse Mode, where remote and host
mouse pointers are visible and need to be synchronized. There is also the Single
Mouse mode. In this mode only the client mouse pointer is visible.
Single Mouse mode needs a Sun Java Virtual Machine 1.3 or later.
Select the mode in the Remote console – see Figure 44.
From the Options menu choose Mouse Handling/Mouse Mode/ Single Mouse Mode.
Or press from the Control Buttons toolbar. The client mouse pointer can be
controlled directly.
To leave this mode, you must define a mouse hotkey in the Remote Console Settings
Panel – see page 18. Press this key to free the captured host mouse pointer.