Minicom Advanced Systems DX User IP - Manual (Page 53)

USER GUIDE
52
4. In the Device Name column type a description.
5. Click Apply. On the Home page Monitor icons representing the direct connection
IP units appear. See Figure 42.
Figure 42 The Monitor icons
The icons are color coded as follows:
Icon Meaning
Gray Powered off or disconnected from the network
Green Powered on but no user is logged in
Orange A user is logged in
Red User is working with the remote console
Note! If the state of one device changes, there may be a delay of some seconds until
icon colors reflect the true situation especially where the network link of this device
is going down.
To connect to an IP unit:
Click the desired icon on the Home page. The Login page of that IP unit appears.
Figure 43 below illustrates a direct connections link scenario.