Miele DG 4164 EN - Manual (Page 24)

At the end of the cooking
duration
There is a cooling down phase at the
end of the cooking duration.
"Stop" will appear in the time display.
The g symbol and "Start" will go out,
and the colon will stop flashing.
A scrolling bar will appear in the
programme/temperature display during
the cooling down phase.
The cooling down phase lasts approx.
one minute. It may last longer than this
when cooking larger quantities.
^ Wait until you hear several beeps, 3
zeros appear in the time display, and
the g symbol flashes.
^ Pull out the shelf.
^ Open the door.
^ Switch off the appliance.
The appliance will now drain. Three
horizontal lines - - - will appear in the
programme/temperature display. Then
°C will appear in the display for as long
as the temperature remains over 45 °C.
Please note that the appliance does not
switch off until the °C symbol has gone
out.
Take care. The cooking
compartment and door may still be
hot even after the cooling down
phase. When removing dishes from
the oven, use dry oven gloves.
Be careful not to spill any of the
contents.
Operation
24