Miele DG 4164 EN - Manual (Page 49)

When the appliance is ready to begin
the descaling process, a beep will
sound and
E03 will appear in the
programme/temperature display.
^ Now fill the syringe with descaling
agent from the container, and inject
the contents of 2 syringes into the
opening.
^ Then fill the syringe with water and
inject the water into the opening. This
needs to be done twice.
You will then hear a beep and
E04 will
appear in the programme/temperature
display. A descaling duration of 30
minutes will appear in the time display.
This time cannot be altered.
The descaling process will now begin.
A beep will sound when the descaling
process reaches the draining and
rinsing stages and
E05 to E07 will
appear in the display.
When the descaling process has
finished a beep will sound and
E08 will
appear in the programme/temperature
display. 3 zeros and a flashing g
symbol will appear in the time display.
After descaling:
^ Pull out the shelf.
^ Open the door.
^ Switch off the appliance.
^ Wipe out the cooking compartment
with a mild solution of hot water and
washing-up liquid or a little vinegar
and water and then dry it with a cloth.
^ Dry the descaling agent opening to
avoid a build-up of encrustations.
^ Leave the door open to allow the
compartment to dry out thoroughly.
^ Close the stopcock to avoid any risk
of water damage.
^ Push the shelf back in again.
If there is any descaling agent left in the
container, use the syringe to put it back
into the bottle.
Wash the container thoroughly.
Cleaning and care
49