Miele DG 4164 EN - Manual (Page 48)

Proceed as follows:
^ Wait until the appliance has cooled
down.
^ Press the nozzle out of the plunger
on the syringe supplied and attach it
to the spout of the syringe as shown.
^ Close the door and switch on the
empty appliance.
The k symbol, the Descale
programme symbol k and a number
will appear in the
programme/temperature display.
^ Press the Start/Stop button.
E00 will appear in the
programme/temperature display, the k
symbol will appear on the left hand side
and the Descale programme symbol k
will also appear.
The appliance will start to drain. Once
the draining process is complete,
E01
will appear in the
programme/temperature display.
^ Fill the syringe with water. Press the
nozzle into the opening on the top left
of the front of the appliance (see
arrow) and inject 1 syringe of water
slowly and evenly. Make sure you
keep the nozzle horizontal.
^ Pour 300 ml of the descaling agent
supplied into a suitable acid-proof,
e.g. glass or china, container.
^ Now fill the syringe with descaling
agent from the container, and inject
the contents of 1 syringe into the
opening.
^ Then fill the syringe with water and
inject the water into the opening. This
needs to be done twice.
You will then hear a beep and
E02 will
appear in the programme/temperature
display. The machine is preparing itself
for the descaling procedure.
If you do not hear the beep, do not
inject any more water into the
system.
Wait for five minutes. If the beep still
does not sound you should switch
the machine off and then back on
again (see "Problem solving guide").
Cleaning and care
48