Meyer Sound Matrix3 LX-300 - Manual (Page 27)

Table 3. LX-300 IEC AC Power Connector
Name Pin
Hot 1
Ground 2
Neutral 3
Component Specifications
LX-ML8 Mic/Line Analog Audio Input
The LX-ML8 provides eight balanced XLR audio inputs with software-controlled microphone and line level gain
settings. The analog audio is converted to 24bit/48kHz digital data for processing by the LX-DSP. Up to two analog
input cards (for a total of sixteen input channels) can be used in a single LX-300. The cards must be installed in
Slots A or B.
Channels
Eight analog mic/line inputs.
Frequency Response
20Hz —20kHz (+/- 0.5dB)
Sampling
24bit/48kHz
Dynamic Range
109 dB (+26dBu, 20 kHz BW)
THD+N
<0.001% (+26dBu, 20-20kHz)
EIN
-125dBu (22kHz BW, max gain, Rs=150 ohms)
Crosstalk
-110dB (20-20kHz, +26dBu, channel-channel)
CMRR
-60dB (20-20kHz, -57dBu)
Input Load Impedance
9.2k ohms (balanced line-to-line)
Gain Settings for Full Scale
+26dBu, +16dBu to -57dBu in 1dB steps
Phantom Power
+48VDC at 10mA, switched per channel
27
Component Specifications