Meyer Sound Matrix3 LX-300 - Manual (Page 44)

Explanation Error Code
Could not load Flash program IE14
Could not start BoxNet IE16
Could not start SerialNet IE17
Could not obtain TCP/IP Hostname IE18
Could not obtain Midi serial socket IE19
Could not start Midi Parser IE20
Could not start Midi Subsystem Manager IE21
Could not start Subsystem IE22
Could not start Midi Xfer system IE23
Could not start CASL subsystem IE24
Could not start Externals subsystem IE25
Could not erase System Flash IE26
Could not erase User Flash IE27
Could not autostart Cue List IE28
Could not start RIF subsystem IE29
Could not start CobraNet subsystem IE30
Could not start DSP subsystem IE31
Could not start Relay subsystem IE32
Could not erase EtherTracks Flash IE33
Could not start TCP/IP subsystem IE34
Could not start SMPTE subsystem IE35
Could not start CueStation 4 server IE36
These errors are self-explanatory, and indicate a problem with the system software.
Frame Status Error Messages
Some errors are shown as a text message on the Frame Status display.
DMA0 DID NOT INTIALIZE PROPERLY. POWER CYCLE TO CORRECT
DMA1 DID NOT INTIALIZE PROPERLY. POWER CYCLE TO CORRECT
COBRANET DSP HAS STOPPED RESPONDING. POWER CYCLE TO CORRECT
MISSING BOOT ETHERTRACKS FILE. PLEASE SEND FILE
ETHERTRACKS FLASH FAILURE. REFLASH TO CORRECT
ETHERTRACKS DUALPORT FAILURE. POWER CYCLE TO CORRECT
ETHERTRACKS BOOT FAILURE. POWER CYCLE TO CORRECT
MISSING MAIN ETHERTRACKS FILE. PLEASE SEND FILE
ETHERTRACKS STARTUP FAILURE. POWER CYCLE TO CORRECT
CONFIGURATION FOR ETHERTRACKS MISSING. PLEASE SEND CONFIGURATION
COBRANET COMMUNICATION FAILURE. POWER CYCLE TO CORRECT
COBRANET INTERNAL FAILURE. POWER CYCLE TO CORRECT
These errors are non-fatal, but do require a firmware upload or that the LX-300 be rebooted.
44
Frame Status Error Messages