Set tty mode – Motorola Z6C User Manual
Page 37
35
basics
plug the TTY device into the phone’s headset
connector and set the phone to operate in one of
three TTY modes.
Notes:
•
A TTY is a communication device used by
people who are hard of hearing or have a
speech impairment. TTY does not work from
mobile phone to mobile phone.
•
Use a TSB-121 compliant cable (provided by
the TTY manufacturer) to connect the TTY
device to your phone. Your phone has a
2.5mm jack.
•
Set the phone to Medium volume level for
proper operation. If you experience a high
number of incorrect characters, adjust the
volume as needed to minimize the error rate.
•
For optimal performance, your phone should
be at least 12 inches (30 centimeters) from the
TTY device. Placing the phone too close to the
TTY device may cause high error rates.
set TTY mode
ù
When you set your phone to a TTY mode, it
operates in that mode whenever a TTY device is
connected.
1
Press the center select key (
s
) to open the
menu.
2
Use the navigation key (
S
) to scroll to
D
SETTINGS & TOOLS.
3
Scroll to Call Settings and press the center select
key (
s
) (OK).
4
Select TTY Mode and press the center select
key (
s
) (OK).