Motorola Z6C - Manual (Page 72)

70 connections
2 Use the navigation key ( S ) to scroll to [Add New
Device] or select the name of your handsfree device
if you have paired with it previously.
3 Press the center select key ( s ) (OK).
4 If connecting to a new device, place the new
device in discoverable mode and press the center
select key ( s ) (OK) on your phone.
5 When your phone finds your handsfree device,
press the center select key ( s ) (PAIR).
disconnect from a device
Scroll to Bluetooth and select Off.
Note: You cannot switch to a headset or car kit if you
are already connected to a Bluetooth device.
cable connections
Your phone has a micro-USB
port so you can connect it to
a computer.
• You must use the
cables in the
Motorola Original ™ data kit (see the data kit
user’s guide for more information).
• Connect the phone to a high-power USB port
on your computer (not a low-power one such
as the USB port on your keyboard or
bus-powered USB hub). Typically, USB
high-power ports are on your computer.
Note: If you connect your phone to a
low-power USB port, the computer may not
recognize your phone.
• Make sure both your phone and the computer
are turned on.