32 rerecording (tape duplication) – Philips Magnavox MVR650MG/17 User Manual

Page 32

Advertising
background image

32 Rerecording (Tape Duplication)

• If you connected another VCR to

the AUDIO/VIDEO IN jacks on the
back of VCR 2, press 0, 0, 1 at
step 5. L1 will appear on the TV.

• If you connected another VCR to

the AUDIO/VIDEO In jacks on
front of VCR 2, press 0, 0, 2 at
step 5. L2 will appear on the TV.

• When the VCR is set to L1 or L2,

the screen is blue.

• Unauthorized recording of copy-

righted TV programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws. A copy-pro-
tected program will not record
clearly.

• Audio and video cables are not

supplied.

• If you have the MVR440MG/17

or MVR450MG/17, connect one
audio cable to the AUDIO OUT
jack on VCR1 and to the AUDIO
IN jack on VCR2.

Helpful Hints

ANT

AUDIO

VIDEO

IN

OUT

OUT

IN

OUT

L

R

IN

ANT

AUDIO

VIDEO

IN

OUT

OUT

IN

OUT

L

R

IN

VCR 1

Playing VCR

VCR 2 Recording VCR

1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2

2.Video cable from VIDEO OUT Jack of VCR
1 to VIDEO IN Jack of VCR 2

3. RF coaxial cable

from the OUT

jack of VCR 2 to

the TV’s ANTEN-

NA IN Jack

1

Make the connections shown above.

2

VCR 1 will play your tape. Insert a prerecorded tape
in VCR 1.
If the tape does not have a record tab, play
begins. If this happens, press STOP/EJECT on VCR 1 once.

3

VCR 2 will record your tape. Insert a blank tape in
VCR 2.
Make sure the record tab is intact (see page five).
Make sure VCR 2 is on and in VCR position. (The green
VCR/TV light will appear. If it does not, press VCR/TV once.)

4

Turn on the TV and set it to channel 3 or 4 (the RF
output channel of VCR 2). See page seven.

5

Point the remote at VCR 2. Press 0, 0, 1 or 0, 0, 2. (See
Helpful Hints at right.)

6

Point the remote at VCR 2. Use SPEED to select SP
or SLP.

7

Press PLAY on VCR 1 and RECORD on VCR 2 at the
same time.

8

To stop recording, press STOP/EJECT on VCR 2
once, then stop the tape on VCR 1.

These instructions show you how to copy tapes using two
MVR650MG/17 VCRs. Different VCRs may operate differently.

Advertising