Understanding on-screen displays, Or r l – Philips Magnavox MVR650MG/17 User Manual
Page 39
MTS Broadcast Stereo (MVR650MG/17) 39
Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your pro-
gram is recorded in a second language). Of course, your VCR will play tapes recorded in monaural (single-
source) sound as well.
Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR,
it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups.
Then follow the directions on page 40 to record in stereo or second audio and the directions on page 41
to play back tapes recorded in Hi-Fi stereo.
Understanding On-Screen Displays
When you receive a signal from a channel you’re watching, portions of the on-screen display shown below
will appear when you press STATUS on the remote.
The indication SAP or STEREO that appears on the status display tells you if
the program you’re watching is available in second audio or stereo.
Even though a program is available in second audio or stereo, you still must
program the VCR to receive or record the program. Follow the directions on
page 40. This indication is not available during tape play.
STOP
12:00 AM
CH 02
STEREO
SAP
SLP
To record and play back programs broadcast in stereo, even if you have a Single Speaker TV, just use one of
the connections shown, then follow the steps on pages 40-41.
R
L
VIDEO
IN
OUT
IN
OUT
AUDIO
OUT
IN
ANT
Stereo Amplifier
or Receiver
Monitor
TV
Single
Speaker TV
Stereo
Speaker TV
OR
R
L
For stereo sound, connect the audio cables to
the AUDIO OUT Jacks on the VCR and to the
AUDIO IN Jacks on the Stereo Amplifier or
Receiver.Then, connect the video cable to the
VIDEO OUT Jack of the VCR and to the
VIDEO IN Jack of a monitor TV.
OR, for monaural sound, connect only
the RF coaxial cable (supplied) to the
VCR’s OUT Jack and to the TV’s
ANTENNA IN Jack.