Philips Magnavox MVR650MG/17 - Manual (Page 9)

Hookups with Cable Box/Satellite (cont’d) 9
ANT AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
IN
OUT
75
ANT /
CAB
LE
With this connection:
● You may watch one channel while recording another.
● You may not record scrambled channels.
TV’s ANTENNA
IN Jack
Cable Box/Satellite
VCR
• When you play a tape, set the
Cable Box/Satellite to the same
channel as the RF output channel
of the VCR. (See page seven.) Set
the TV to the Cable Box/Satellite
output channel (03 or 04).
Helpful Hint
1
2
3
Cable TV or
Satellite
Signal
RF coaxial
cable
RF coaxial
cable
Connections
1 Connect a Cable TV or Satellite signal to the VCR’s
ANT(enna) IN Jack.
2 Use an RF coaxial cable (supplied) to connect the OUT Jack
on the VCR to the IN Jack on the Cable Box/Satellite.
3 Use a second RF coaxial cable to connect the OUT Jack on
the Cable Box/Satellite to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1 Put the Cable Box/Satellite on the same channel as
the VCR’s RF output channel. The default is channel 3.
See page seven.
Set the TV to the Cable Box/Satellite output channel (03 or
04).
Then, with the VCR in VCR position (the green
VCR/TV light will appear on the display panel), use
CH
to select the channel you want to record
at the VCR. Start the recording.
2 Press VCR/TV once to put the VCR in TV position.
(The VCR/TV light will disappear.)
3 Select the channel you want to watch at the Cable
Box/Satellite.