Subsection - setting up rear seat bench, Title - setting up rear seat bench, Bold - setting up rear seat bench – Mercedes-Benz 2001 C 320 User Manual
Page 217: Figure - <graphik, Subsection, Title, Warning - <tabelle, Tbody - <tabellenhaupttext, Row - <tabellenreihe, Entry - warning
208
Interior equipment
Technical
data
Instruments
and controls
Operation
Driving
Instrument
cluster display
Practical hints
Car care
Index
Setting up rear seat bench
1. Pull backrest (4) up until it locks in its upright
position. Check for secure locking by pushing and
pulling on the backrest.
The pop-up indicators (5) (left and right backrest
section) are visible in unlocked position. With
backrest sections in upright and locked position, the
indicators (5) are fully lowered.
2. Fold seat cushion (3) back until it locks in place.
Check for secure locking by pressing on the seat
cushion.
Note:
To prevent unauthorized persons from access to the
trunk, always lock backrest in its upright position.
Warning!
Always lock backrest in its upright position when
rear seat bench is occupied by passengers, cargo is
being carried in the trunk, or the extended cargo
area is not in use.