Subsection - storing positions into memory, Title - storing positions into memory, Para - adjust the seat to the desired position – Mercedes-Benz 2001 C 320 User Manual
Page 95: Para - turn button (2) to selected memory position, Subsection - recalling positions from memory, Title - recalling positions from memory, Caution - caution, Blocktitle - caution, Para - first move backrest to an upright position
86
Memory function
Technical
data
Instruments
and controls
Operation
Driving
Instrument
cluster display
Practical hints
Car care
Index
Storing positions into memory:
With the electronic key in starter switch position 1 or 2
or with the relevant door open and the electronic key
inserted in the starter switch.
Adjust the seat to the desired position.
Driver’s seat:
You can also adjust the steering wheel and the exterior
mirrors electrically for the driver’s seat. See page 81 for
exterior mirror adjustment and page 79 for steering
wheel adjustment.
Turn button (2) to selected memory position.
Push memory button (1), release and push the position
button (2) within 3 seconds.
Recalling positions from memory:
To recall a seat /steering wheel and exterior rear view
mirror position, turn button (2) to selected memory
position and press to recall.
The seat / steering wheel and exterior rear view mirror
movement stops when the button is released.
Caution!
Do not operate the power seats using the memory
button if the backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
First move backrest to an upright position.