Subsection - seat belts:fastening, Title - seat belts:fastening, Marker - seat belts:fastening – Mercedes-Benz 2001 C 320 User Manual
Page 67: Figure - <graphik, Orderedlist - 1 latch plate, Item - 1 latch plate, Item - 2 buckle, Item - 3 release button, Warning - <tabelle, Tbody - <tabellenhaupttext
58
Restraint systems
Technical
data
Instruments
and controls
Operation
Driving
Instrument
cluster display
Practical hints
Car care
Index
Fastening seat belts
1
Latch plate
2
Buckle
3
Release button
Push latch plate (1) into buckle (2) until it clicks. Do not
twist the belt. A twisted seat belt may cause injury.
The lap belt should be positioned as low as possible on
your hips and not across the abdomen.
Tighten the lap portion to a snug fit by pulling shoulder
portion up.
The shoulder portion of the seat belt must be pulled
snug and checked for snugness immediately after
engaging it.
Adjust seat belt so that shoulder portion is located as
close as possible to the middle of your shoulder (it
should not touch the neck). For this purpose, you can
adjust the height of the belt outlet.
Warning!
Always fasten your seat belt before driving off.
Always make sure your passengers are properly
restrained – even those sitting in the rear.