Subtitle - upgrade signals, Item - • automatic emergency–first priority, Item - • manual emergency–second priority – Mercedes-Benz 2001 C 320 User Manual
Page 234: Item - • roadside assistance–third priority, Item - • information–fourth priority, Important - important, Blocktitle - important, Note - notes, Blocktitle - notes
225
Tele Aid
Technical
data
Instruments
and controls
Operation
Driving
Instrument
cluster display
Practical hints
Car care
Index
Upgrade Signals
Tele Aid system processes calls using the following
priority.
• Automatic emergency – First priority
• Manual emergency – Second priority
• Roadside assistance – Third priority
• Information – Fourth priority
Should a higher priority call be initiated while you are
connected, an upgrade (alternating) tone will be heard,
and the appropriate indicator lamp will flash. If certain
information such as vehicle identification number or
client information is not available, the operator may
need to retransmit. During this time you will hear a
chirp and voice contact will be interrupted. Voice
contact will resume once the retransmission is
complete. Once a call is concluded, a chirp will be heard,
the appropriate indicator lamp will stop flashing and a
tone will be heard indicating that the system has reset.
Important!
If the indicator lamp continues to flash or the system
does not reset, contact the Response Center at
1-800-756-9018 (in the USA) or 1-888-923-8367 (in
Canada), or Mercedes-Benz Client Assistance at
1-800-FOR-MERCedes (1-800-367-6372) in the USA or
Customer Service at 1-800-387-0100 in Canada.
Notes:
The indicator lamp in the respective button flashes until
the call is concluded and this can only be completed by
a Response Center or Client Assistance Center
representative.