Subtitle - operation of remote control, Bold - operation of remote control, Subtitle - erasing the remote control memory – Mercedes-Benz 2001 C 320 User Manual

Page 225: Bold - erasing the remote control memory

Advertising
background image

216

Garage door opener

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Operation of remote control:

1. Turn electronic key in starter switch to position 1

or 2.

2. Select and press the appropriate button to activate

the remote controlled device. The integrated remote
control transmitter continues to send the signal as
long as the button is pressed – up to 20 seconds.

Erasing the remote control memory:

1. Turn electronic key in starter switch to position 1

or 2.

2. Simultaneously holding down the left and right side

buttons for approximately 20 seconds, or until the
control lamp blink rapidly, will erase the codes of all
three channels.

Advertising
This manual is related to the following products: