Muratec F-300 - Manual (Page 39)

2-3 G
ETTING STARTED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
G
ETTING
ST
ARTED
Upper and lower case characters
Press [ ] to toggle between upper and lower case.
Your Name ;Upper
_
Your Name ;Lower
_
“Upper” means the machine will enter only upper-case letters, similar to the "Caps
Lock" button on your PC.
“Lower” means the machine will enter only lower-case letters.
Entering symbols
You can also enter special characters or symbols.
1
When the machine prompts you to enter a name, press [ ].
The LCD will change to:
�/�/�/�/Enter
2
Select the character you want to enter using the , , or keys.
3
To enter a character, press [Enter].
4
If you want to enter another character, repeat steps 1 to 3.
Otherwise, go to next step.
5
Press [Enter] to save it.
Editing characters
If you entered an incorrect letter or digit, press [Cancel] to erase the character on the
left.
To edit just one character or digit, press [ ] or [ ] to move the cursor to that character
or digit. Then press [Cancel] to erase it. Re-enter the correct character or digit.
Backup memory
User data and auto-dialing settings are automatically backed up in memory.
However, documents stored in memory will be lost after 72 hours if there is a power
failure or if you disconnect the power cord. (See “Specifications,” page AI-2.)