Muratec F-300 - Manual (Page 60)

3-8 A
UTODIALLER
& D
IALLING OPTIONS
How to dial using a speed-dial number
Press this key once.
Enter three-digit code. Press Start. MFX-1330 control panel.
Fax dialing via speed-dial
1
Switch to the Fax mode by pressing [COPY

FAX

SCAN].
2
Place the document on the ADF or the document glass.
3
When you use the document glass, select the document size by pressing [Doc. Size].
4
Adjust the document resolution and contrast.
5
Press [Speed Dial /Group] once.
Enter Speed Dial No.
S_
6
Use the numeric keys to enter the three-digit identifier for the speed-dial number. The
machine will show the name (or fax number) you have stored:
Sales division
S001_
7
Press [Start].
NOTE: The document glass is available only for the MFX-1330.
Phoning via speed-dial
NOTE: To connect an external phone to your machine to make a phone call (see page 1-8).
1
Lift the telephone handset.
2
Press [Speed Dial /Group] once.
** Tel Mode **
S_
3
Use the numeric keys to enter the three-digit identifier for the speed-dial number. As
the machine dials, it will show the number on the LCD.